Features:
1. BLDC wide voltage 7-24V high-power small-volume potentiometer speed control Brushless and Hallless controller,
2. single-button version supports single-button free switching acceleration and deceleration with power-off memory function
2. potentiometer speed control version supports PLC 0-5V simulation Signal speed
Description:
Name: Motor Driver
Model: X30A (potentiometer)
Working voltage: 7-24V
Drive current: rated 15A plus fan cooling 20A
Maximum speed: 224000 RPM (2 pole motor), 74000 RPM (6 pole motor), 40000 RPM (12 pole motor), 35000 RPM (14 pole motor).
Product size: length 45MM x width 26MM x height 12MM (excluding wires and protruding capacitors)
Interface Description:
1. U V W phase line output is connected to the motor
2. VCC GND main power supply (external DC power supply)
Precautions:
1. There is no fuse in the power supply circuit on the motherboard. Jianyi has added it himself. Reverse connection of the positive and
negative poles of the power supply will cause permanent damage to some of the chips on the board (even if it does not work for 1 second)
2. There is motor blocking protection during normal operation. Because the power and current of the module are large, please do not
artificially short-circuit when the module is not working normally. Once the short-circuit may burn the line and the tube may burst,
please use the small for the first wiring test. Current low voltage test, after ok, then pass high current to work
3. Do not connect the motor that is obviously inconsistent with the drive module voltage, current, or power, to avoid inexplicable ""
nonsensical"" damage
Instructions for use of potentiometer models:
The standard power distribution positioner directly regulates the speed without external control signals. It increases clockwise and decreases counterclockwise.
It is also suitable for external PLC 0-5 analog quantity control. Unplug the potentiometer cable, the external 0-5 analog quantity control
signal and ground wire are respectively connected to the input signal terminal of the brushless driver board, as long as two wires are OK
Packing list:
1 x DC 7-24V 200W BLDC 3-Phase Brushless Motor Driver
Different displays may cause the color of the item in the picture a little different from the real thing.
Manual measuring,please allow 1~3mm error,thank you.
