Mattoverse Electronics Drone Tone MK III Guitar Effector

------------------------------------------------------------------------------------------------------------------ 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ------------------------------------------------------------------------------------------------------------------ Mattoverse Electronics Drone Tone MKIII is a drone synthesizer for pedalboards. You can mix a simple square wave oscillator with your guitar or bass tone with the same operability as a guitar pedal. It can also be used as a standalone simple drone synth. The signal coming from the input is not processed at all, just mix it with the drone synth using the MIX knob. The Drone Tone MKIII features tap tempo, 0-5V CV sync tempo setting, internal pitch range control, and top-mounted jack style. Mattoverse Electronics Drone Tone MKIII is a drone synthesizer for pedalboards. You can mix a simple square wave oscillator with your guitar or bass tone with the same operability as a guitar pedal. It can also be used as a standalone simple drone synth. The signal coming from the input is not processed at all, just mix it with the drone synth using the MIX knob. The Drone Tone MKIII features tap tempo, 0-5V CV sync tempo setting, internal pitch range control, and top-mounted jack style. This is not a traditional "guitar pedal". It may not be necessary for most guitarists around the world. That's why it's Mattoverse. It's simple and fun, and you can tune it according to the pitch and key, and be captivated by the sound produced. This pedal has the potential to create new sounds depending on your imagination, such as matching it with bass, combining it with delay and reverb, or using it as a looper. ●Control ・Rate: Turning the knob clockwise will increase the square wave pulse speed. When this knob is turned clockwise to maximum, the sound changes to a connected non-pulse tone. Pressing the tap tempo switch overwrites the Rate knob setting with the tap tempo. The same goes for the signal from the SYNC input. The overwritten tempo will return to the new Rate knob setting when you turn the knob. ・Pitch: Turning the knob clockwise increases the pitch. By default, the pitch range is set to approximately 3 octaves, starting from B♭. You can adjust the maximum pitch range with the trim pot inside the pedal. ・Mix: Turning clockwise increases the volume of the square wave oscillator. ・Tone: Turning clockwise brightens the tone of the square wave oscillator. ・Bypass footswitch: Turns the oscillator ON/OFF. ・Tap Tempo: You can adjust the square wave pulse speed with tap tempo. ・Input: Connect your instrument. The signal coming in from here is not processed; only the volume is adjusted using the Mix control. ・Output: Connect the amplifier. ・Sync: You can synchronize the tempo with other devices using 0-5V Gate (CV). ・DC: Connect the center negative DC9V adapter. Current consumption is about 20mA. Batteries cannot be used.